100 Ton Screw Compressor Chiller 100 Tr Air Cooled Water Cooled For Cooling Bottle Blowing Machine

100 Ton Screw Compressor Chiller 120 Tr Air Cooled Water Cooled For Cooling Bottle Blowing Machine

Blowing machines require compressed air drying in the production of various plastic water bottles and mineral water bottles. Blowing requires clean and dry compressed air. The ice water provided by the industrial chiller can be used as a cold source to remove moisture from the compressed air. The mold cooling chiller can accurately control the mold temperature, improve product quality, and improve production efficiency. The same chiller can be used as a cold source for compressed air drying and mold cooling.

Specification

Working principle of the chiller for bottle blowing machine

1. The working principle of the bottle blowing machine is to blow small preforms into large bottles.
2. First, the tubular plastic preform obtained by extrusion or injection molding of thermoplastic resin raw materials is heated to a softened state and placed in a split mold.
3. After the mold is closed, compressed air is immediately introduced into the preform to make the plastic preform inflated and tightly attached to the inner wall of the mold. After cooling and demolding with cooling water, various hollow plastic products are obtained.
4. In order to make the product surface smooth, avoid blisters to achieve a beautiful effect, and increase the number of products, a chiller is needed to cool

Air-cooled screw chiller featurers

1. The water chiller has complete protection functions, including power supply phase sequence, high and low pressure, motor overload, anti-freeze protection, etc.
2. High strength monolithic welded frame, body case is galvanized sheet and outdoor type spray material
3. Evaporator can choose stainless steel plate pack, shell and tube type, acid and alkali resistant corrosion type and other different kinds.
4. Screw chiller compressor capacity control can be used in four stages (100%-75%-50%-25%) or three stages (100%-66%-33%) and no stage control system in the best working condition, so as to effectively save energy.
5. Air-cooled screw chiller does not need to be equipped with cooling pump, cooling tower and other auxiliary equipment, can save a lot of materials and engineering installation costs, and even do not need to set up the machine room.
6. LC control system,integrated controller, fully automatic operation, to provide fault warning.

Benefits

1. Water screw chillers could accurately provide the needed temperature for industrial manufacturing and largely improve efficiency and product quality.
2. The industrial water chillers are use to maintain constant and precise control of the process temperature.
3. Chillers can decrease equipment depreciation and degradation to cut down on operating expenditures.
4. The benefits offered by water chiller include low maintenance, high efficiency and long service.
5. Easy to use, do not need to install water pump and water pump, connect the pipe, power can be used.
6. Save water compare with water-cooled chiller.

Industrial water chiller service from manufacturer

1. 1.All the chillers are provided with 12 months free maintenance service.
2. Provide technical explanation, chiller debugging support, technical training and chiller maintenance guidance.
3. If necessary, after-sales engineers can be on-site service confirmed by both parties through communication .In some areas, local dealers can provide fast and convenient service.
4. Provide the air chiller and water chiller required parts quickly to ensure the normal use of customers.If necessary, part of the wearing parts can be provided for backup after confirmation by both parties.
5. Chiller maintenance service outside the warranty period, life-long tracking maintenance, cost price to provide equipment parts.

100 Ton Screw Compressor Chiller 100 Tr Air Cooled Water Cooled For Cooling Bottle Blowing Machine Images